金屬材料

碳素鋼筋彎曲試驗
 CS2 *

碳素鋼筋的反向彎曲試驗
 CS2 *

在 3kN - 2000 kN 力值範圍內的碳素鋼筋的拉伸試驗
 CS2 *

鋼筋的每米質量
 BS 4449: 2005 + A2: 2009 CS2: 2012*

鋼筋反向彎曲試驗
 BS 4449: 2005 + A2: 2009 CS2: 2012 *

在 3 kN - 2000 kN 力值範圍內的金屬材料的拉伸試驗
 BS EN 10002-1 *
 BS EN ISO 6892-1 *

在 3 kN - 2000 kN 力值範圍內的連接器鋼筋拉伸試驗
 In-house Method *
    In conjunction with the following specification(s):
      BS 8110 -1 *
      General Specification for Civil Engineering Works (2006) Vol. 2 Cl.15.35 *
      Building Department Code of practice for Structural Use of Concrete (2013) Cl. 3.2.8.3 *

金屬材料的夏比V型缺口衝擊試驗
 BS EN 10045-1 *
 BS EN ISO 148-1 *
  In conjunction with the following specification(s):
   BS EN 10021 *
   BS EN 10025-1 *
   BS EN 10025-2 *
   BS EN 10025-3 *
   BS EN 10025-4 *
   BS EN 10025-5 *
   BS EN 10025-6 *
   BS EN 10210-1 *
   BS EN 10219-1 *
   BS EN 1563 *
   BS EN ISO 898-1 *

在 3 kN - 2000 kN 力值範圍內的鋼筋的拉伸試驗
 BS 4449: 2005 + A2: 2009 *
 CS2 *

在 3 kN - 2000 kN 力值範圍內的金屬材料的拉伸試驗
 BS EN 10002-1 *
 BS EN ISO 6892-1 *

在 3 kN - 2000 kN 力值範圍內的螺栓和螺絲拉伸試驗
 BS EN ISO 898-1*
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *

在 3 kN - 2000 kN 力值範圍內的螺栓和螺絲機加工試樣拉伸試驗
 BS EN ISO 6892-1 *
  In conjunction with the following specification(s):
   BS EN ISO 898-1 *
   BS 3692 *
   BS 4190 *

在 3 kN - 2000 kN 力值範圍內的螺栓和螺絲保證載重試驗
 BS EN ISO 898-1 *
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *

在 3 kN - 2000 kN 力範圍內鋼螺帽的保證載重試驗
 BS EN ISO 898-2 *
 BS 3692 *
 BS 4190 *

HV5、HV10 和 HV30 範圍內金屬維氏硬度試驗
 BS EN ISO 6507-1 *
 BS EN 23878 *
 BS 427 *
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *
   BS EN 10088-2 *
   BS EN ISO 898-1 *
   BS EN ISO 898-2 *
   BS EN ISO 3506-1 *

* Hoklas 認證報告

Metallic Materials

​Bend test of carbon steel bars
 CS2 * 
 
Rebend test of carbon steel bars
 CS2 * 
 
Tensile test of carbon steel bars in the force range 3kN – 2000kN
 CS2 * 
 
Mass per meter of steel reinforcing bars
 BS 4449: 2005 + A2: 2009 CS2: 2012 *
  
Rebend test of steel reinforcing bars
 BS 4449: 2005 + A2: 2009 CS2: 2012 *

Tensile test of metallic materials in the force range 3kN – 2000kN
 BS EN 10002-1 * 
 BS EN ISO 6892-1 *
 
Tensile test of reinforcing bar with mechanical coupler in the force range 3kN – 2000kN
 In-house Method *
    In conjunction with the following specification(s):
      BS 8110 -1 *
      General Specification for Civil Engineering Works (2006) Vol. 2 Cl.15.35 *
      Building Department Code of practice for Structural Use of Concrete (2013) Cl. 3.2.8.3 *
 
Charpy V-notch impact test of metallic materials
 BS EN 10045-1 *
 BS EN ISO 148-1 *
In conjunction with the following specification(s):
 BS EN 10021 *
 BS EN 10025-1 *
 BS EN 10025-2 *
 BS EN 10025-3 *
 BS EN 10025-4 *
 BS EN 10025-5 *
 BS EN 10025-6 *
 BS EN 10210-1 *
 BS EN 10219-1 *
 BS EN 1563 *
 BS EN ISO 898-1 *

Tensile test of steel reinforcing bars in the force range 3 kN – 2000 kN 
 BS 4449: 2005 + A2: 2009 *
 CS2 *

Tensile test of metallic materials in the force range 3 kN – 2000 kN 
 BS EN 10002-1 *
 BS EN ISO 6892-1 *

Tensile test of bolts and screws in the force range 3 kN – 2000 kN 
 BS EN ISO 898-1*
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *

Tensile test of machined specimen of bolts and screws in the force range 3 kN – 2000 kN
 BS EN ISO 6892-1 *
  In conjunction with the following specification(s):
    BS EN ISO 898-1 *  
    BS 3692 *
    BS 4190 *

Proof load test of bolts and screws in the (cont’d) force range 3 kN – 2000 kN 
 BS EN ISO 898-1 *
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *

Proof load test of steel nuts in the force range 3 kN – 2000 kN
 BS EN ISO 898-2 *
 BS 3692 *
 BS 4190 *

Vickers hardness test of metal in scale range of HV5, HV10 and HV30 
 BS EN ISO 6507-1 *
 BS EN 23878 *
 BS 427 *
  In conjunction with the following specification(s):
   BS 3692 *
   BS 4190 *
   BS EN 10088-2 *
   BS EN ISO 898-1 *
   BS EN ISO 898-2 *
   BS EN ISO 3506-1 *

​* Hoklas accredited report